Psion Teklogix Omnii XT10, Руководство пользователя

Страница: 169 / 358

Chapter 5: Configuration
Options Tab
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual 153
5.12.2.2 Display Parameters
Scan Result
When this parameter is enabled, the type of bar code and the result of the scan appear on the
screen. Note that this information is only displayed after a successful decode and is visible
only while the scanner trigger is pressed. When the trigger is released, this information is
cleared from the screen.
Scan Indicator
When this parameter is enabled, the laser warning logo appears on the display whenever the
scanner is activated.
Scan Result Time (sec)
The value assigned to the Scan Result Time parameter determines how long the scan results
of a successful scan are displayed on the screen. Time is measured in seconds, and a value of
0 (zero) disables the parameter. When you choose this option, a dialog box appears where
you can enter a value.
Good Scan Beep and Bad Scan Beep
These parameters determine whether or not Omnii emits an audible scanner ‘beep’ when a
good (successful) scan or a bad (unsuccessful) scan is performed. Set these parameters to
either
on to enable the beeper or off to disable it.
Note: To remove the scan result from the screen before the “Result Time” has expired,
point the scanner away from the bar code and press the trigger.