Psion Teklogix Omnii XT10, Руководство пользователя

Страница: 170 / 358

Chapter 5: Configuration
Translations Tab
154 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Good Scan Vibrates and Bad Scan Vibrates
These parameters determine whether or not Omnii creates a vibration when a good (success-
ful) scan or a bad (unsuccessful) scan is performed. Set these parameters to either
on to
enable the beeper or off to disable it. You can set the Number and Duration of vibrations, as
well as the Pause between vibrations. The screen above shows the default settings.
Soft Scan Timeout
This parameter is used by the SDK “Scan” function (soft-scan: starting a scan session via the
SDK function, instead of a physical user trigger press). The value assigned to this parameter
determines the soft-scan timeout from
1 to 10 sec (default is 3 sec ).
Scan Log File
If this parameter is enabled, the input bar code and the modified/translated output bar code
are logged in the file
\Flash Disk\ScanLog.txt . Keep in mind that if Scan Log File is enabled,
there is a slight performance reduction when performing multiple scans since the log file is
written to persistent storage.
5.12.3 Translations Tab
The Translations menu allows you to define up to 10 cases, each consisting of up to 10 rules
in sequential order. Only one case will be applied to a bar code and a case will only be
applied if all rules specified in the case are successful—if a rule within a case fails, the entire
case fails.