PSG Wilden PS Brahma Series, Инженерия, эксплуатация и обслуживание

Страница: 15 / 32

Step 16
Remove the discharge elbow and
discharge T-section from the liquid
chamber. This will allow for easy
removal of the flap valve assembly.
Inspect for nicks, gouges, chemical
attack or abrasive wear.
Step 17
Using a 5/8” wrench and an
adjustable wrench, remove the
fasteners that connect the liquid
chambers to the center section.
Step 18
Remove the liquid chamber to
expose the diaphragm and outer
piston.
Step 19
Next, remove center section
assembly from pump stand.
Step 20
Using two (2) 3/8” hex-head
wrenches, loosen the outer piston
from the main shaft.
Step 21
After loosening the outer piston
from the main shaft, the diaphragm
assembly and bumper can be
removed from the center section.
P U M P D I S A S S E M B L Y
WILDEN PUMP & ENGINEERING, LLC
13
WIL-11320-E-01