NT 1002-C00 11.11 S6C S6C HP Pumps e
2/12
ECCENTRIC PISTON
MOUVEX PRINCIPLE
SAFETY, STORAGE, INSTALLATION AND MAINTENANCE INSTRUCTIONS
S6C - S6C HP MODELS
1. OVERALL DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . .3
2. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.1 Fixing to the ground of non-mobile units . . . . . . . . . . .4
2.2 Orientation of the pump ports . . . . . . . . . . . . . . . . . . . .4
2.3 Direction of rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.4 Protection of the installation . . . . . . . . . . . . . . . . . . . . .4
2.5 Unit assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3. USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3.1 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3.2 Dry running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3.3 Scrapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
4. CLEAN IN PLACE (CIP) & STERILISATION IN PLACE
(SIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4.1 Preamble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4.2 Cleaning Out of place . . . . . . . . . . . . . . . . . . . . . . . . . .7
4.3 Cleaning In Place . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4.4 Sterilisation In Place (SIP) . . . . . . . . . . . . . . . . . . . . . .8
5. ASSEMBLY / DISMANTLING . . . . . . . . . . . . . . . . . . . . . . .9
5.1 Necessary tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5.2 Opening the pump . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5.3 Dismantling the transmission block . . . . . . . . . . . . . .10
5.4 Remounting the transmission block . . . . . . . . . . . . . .10
5.5 Remounting the pump . . . . . . . . . . . . . . . . . . . . . . . .10
6. MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
6.1 Checking of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
6.2 Checking of seals . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
7. CERTIFICATE OF CONFORMITY . . . . . . . . . . . . . . . . . .12
TABLE OF CONTENTS
Page
TECHNICAL CHARACTERISTICS
• Maximum speed :
530 rpm
• Range of acceptable temperature :
EPDM :
* continuous.......................................0° C to 80°C
* washing / rinsing / sterilisation
.....
0° C to 80°C
FKM :
* continuous
.......................................
0° C to 80°C
* washing / rinsing / sterilisation
.....
0° C to 121°C
• Acceptable pressure to the suction :
* minimum :
-
0,4 barg (0,6 bara)
* maximum :
3,0 barg (4,0 bara)
• Acceptable maximal differential pressure :
* S6C
. . . . . . . .
6 bar*
* S6C HP
. . . . .
10 bar*
• Cylinder capacity :
* S6C
. . . . . . . .
0,370 liter/rev.
* S6C HP
. . . . .
0,206 liter/rev.
* When the pump works with an inlet gauge pressure less than zero, the
maximum outlet pressure will be calculated as if the inlet pressure is
equal to zero.
This is a SAFETY ALERT SYMBOL
When you see this symbol on the product, or in the manual, look
for one of the following signal words and be alert to the potential for
personal injury, death or major property damage.
Warns of hazards that WILL cause serious personal injury,
death or major property damage
Warns of hazards that CAN cause serious personal injury,
death or major property damage
Warns of hazards that CAN cause serious personal injury,
death or major property damage.
NOTICE
Indicates special instructions which are very important and
must be followed.
SAFETY INFORMATIONS
WARNING
CAUTION
DANGER
Pump n° :
Date of bringing into service :
USED PRESSURE UNITS
Unit without suffix :
Differential pressure, for example, pressure difference between
equipment suction and discharge.
Unit with suffix "a" :
Absolute pressure.
Unit with suffix "g" :
Gauge pressure, given regarding to atmospheric pressure
(~101325 Pa, taken at 1 bar / 14,5 psi in this IOM).
Pompe
P
asp
P
ref
P
suc
P
dis
P
ump
Example :
P
suc = -0,2 barg = 0,8 bara
P
dis = 8,8 barg = 9,8 bara
∆
P
=
P
dis -
P
suc = 9 bar
