PSG CADDY ALTERNA II, Инструкция по установке и эксплуатации

Страница: 25 / 108

25
5.7.6 PERMITTED TERMINATION LOCATION
Refer to NFPA 211 (USA) or CSA B365 (Canada) for rules for the distance of exit terminals from windows and
openings. The exit terminal of a mechanical draft system, other than a direct vent appliance (2-in-1 exhaust and
fresh air intake) shall be located in accordance with the following.
Canada:
Letter Min. clearances Description
A 12
’’ (30 cm)
Clearances above grade level or any adjacent surface that might support
snow, ice, or debris
B
39” (100 cm)
Clearance to a window or door that may be opened
F
39’’ (100 cm)
Clearance to corner or adjacent wall
H
39’’ (100 cm)
Not to be installed above a meter/regulator assembly within 39" (100 cm)
horizontally from the vertical centre
line of the regulator and for 15’ vertically
I
72’’ (183 cm)
Clearance to gas service regulator vent outlet or within 39’’ (100 cm) of an oil
tank vent or an oil tank fill inlet
J
39’’ (100 cm)
Clearance to the combustion air inlet to any other appliance
K
72’’ (183 cm)
Clearance to a mechanical air supply inlet
L
84’’ (213 cm)
Clearance above paved sidewalk or a paved driveway located on public
property
39’’ (100 cm)
Clearance to property boundary
A vent shall not terminate underneath a veranda, porch, or deck