PSG Dover WILDEN PRO-FLO P2, Инженерия, эксплуатация и обслуживание

Страница: 5 / 28

WIL-10181-E-07
Wilden
®
5
LEGEND
MATERIAL CODES
MODEL
P2 = 25 mm (1")
WETTED PATH
A = ALUMINUM
S = STAINLESS STEEL
OUTER PISTON
A = ALUMINUM
S = STAINLESS STEEL
Z = NO OUTER PISTON
CENTER SECTION
PP = POLYPROPYLENE
LL = ACETAL
AIR VALVE
P = POLYPROPYLENE
L = ACETAL
DIAPHRAGMS
BNS = BUNA-N (Red Dot)
EPS = EPDM (Blue Dot)
FBS = SANITARY BUNA
1,3
(Two Yellow Dots)
FES = SANITARY EPDM
1,3
(Two Blue Dots)
FSS SANIFLEX™ (Cream)
FWL = SANITARY WIL-
FLEX™
IPD
1,3
FWS = SANITARY WIL-
FLEX™
1,3
LEL = PTFE
– EPDM LAMINATE
IPD
1,2,3
NES = NEOPRENE (Green Dot)
PUS = POLYURETHANE (Clear)
TEU = PTFE w/EPDM
BACK-UP (White)
1,2,3
PUS = POLYURETHANE (Clear)
TEU = PTFE w/EPDM
BACKUP (White)
1,2,3
TNU = PTFE W/NEOPRENE
BACKUP (White)
TSS = FULL-STROKE PTFE
w/SANIFLEXTM BACK-UP
1,2,3
TSU = PTFE W/SANIFLEX™
BACKUP (White)
1,2,3
TWS = FULL-STROKE PTFE
w/WIL-FLEXTM BACK-UP
1,2,3
VTS = FKM (Silver or White Dot)
WFS = WIL-
FLEX™ (Orange Dot)
VALVE BALLS
BN = BUNA-N (Red Dot)
EP = EPDM (Blue Dot)
FS =
SANIFLEX™ (Cream)
1,3
NE = NEOPRENE (Green Dot)
PU = POLYURETHANE (Clear)
TF = PTFE
1,2,3
VT = FKM (Silver or White Dot)
WF = WIL-
FLEX™ (Orange Dot)
VALVE SEATS
A = ALUMINUM
S = STAINLESS STEEL
VALVE SEAT O-RINGS
BN = BUNA-N (Red Dot)
EP = EPDM
FS = SANIFLEX™
[Hytrel
®
(Cream)]
1,3
NE = NEOPRENE
PU = POLYURETHANE (Clear)
TF = PTFE (White)
1,2,3
WF = WIL-
FLEX™
1
SPECIALTY CODES
2000 NPT threaded
2014 BSPT threaded
2023 Wing Nuts
2070 Saniflo
™
FDA
2079 Tri-clamp fittings, wing nuts
2080 Tri-clamp fittings only
2100 Wil-Gard 110V
2102 Wil-Gard sensor wires ONLY
2103 Wil-Gard 220V
2480 Pump Cycle Monitor (sensor & wires) 2483 Pump Cycle Monitor (module, sensor & wires)
2070E Saniflo
™
FDA (1935/2004/EC)
NOTE: Most elastomers use colored dots for identification. Not all models are available with all material options.
NOTE: Not all models are available with all material options.
Hytrel
®
is a registered trademark of DuPont Dow Elastomers.
P2 METAL
25 mm (1") Pump
Maximum Flow Rate:
172 lpm (45.5 gpm)
P2 / X X X X X / XXX / XX / X XX / XXXX
MODEL O-RINGS
VALVE SEAT SPECIALTY CODE
VALVE BALLS (if applicable)
DIAPHRAGMS
AIR VALVE
CENTER SECTION
OUTER PISTON
WETTED PATH
Section 2
W I L D E N P U M P D E S I G N A T I O N S Y S T E M
REFERENCES:
1
Meets Requirements of FDA CFR21.177
2
Meets Requirements of USP Class VI
3
Meets Requirements of 1935/2004/EC