Page 8
The second DB-25 connector follows the same wiring for Receivers 4 through 6.
Mechanical Mounting Points:
Photo above shows the four (4) locations of the mounting screws
The PSC RF Multi SR 12 Pack is also equipped with four threaded mounting holes on both the top
and bottom panels. These threaded mounting holes are compatible with 6-32 screws. The screw
threaded inserts are a “blind” fastener style. That means they have a limited
thread length
available and will not allow you to use a screw that is too long. This “blind”
fastener threaded
insert is used so that you cannot thread in a longer than necessary screw that would damage the
circuit board inside the unit.
