PSC LazerData 12000 Series, Руководство по установке

Страница: 9 / 58

viii
The laser light is visible to the human eye and is emitted from the window on the
front of the scanner (Figures A and B,
10
). Warning labels (Figure C), instructing
you to prevent laser light exposure to your eyes and informing you of the laser
device classification, are applied to the body of the scanner (Figures A and B,
7
and
8
).
Model No. Serial No.
Volt Amp.
Manufactured
This product complies with 21 CRF Subchapter 1
PSC Inc. 675 Basket Rd, Webster, NY USA Made in Italy
LISTED
45AF
I.T.E.
R
UL
R
UL
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT RADIATION 1 mW
EMITTED WAVE LENGTH 630~680 nm
TO IEC 825-1 (1993)
Figure C. Warning and device class labels
Disconnect the power supply when opening the device during maintenance or
installation, to avoid exposure to hazardous laser light.
The laser diode used in this device is classified as a class 3B laser product
according to IEC 825-1 regulations and as a Class IIIb laser product according to
CDRH regulations. As it is not possible to apply a classification label on the laser
diode used in this device, the following label (Figure D) is reproduced below.
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAX. OUTPUT RADIATION 7 mW
EMITTED WAVE LENGTH 630~680 nm
TO IEC 825-1 (1993)
Figure D. Laser diode class label
If you make any changes to the laser diode's optic elements, in particular, you can
cause the laser's radiation to increase to its maximum (7 mW at 630 to 680 nm).