Configuration and Use
PowerPlay IPC-8000 and IPC-9000
4826 Sterling Drive, Boulder CO 80301
15-052-01-1-DOM-B
PH: 720.406.8946 [email protected] www.psaudio.com
©2010 PS Audio International Inc. All rights reserved.
Control Panel – Infrared Codes
The Infrared Codes page allows you to setup your PowerPlay to issue IR commands to any
connected device as if you were standing there with the original remote for the device. In order
for this feature to work you must integrate your PowerPlay with an IR distribution system.
To add a new IR command click on
Add New Code
1.
Enter a name for the command you wish to setup.
2.
Choose how you would like to trigger the event from the available options in the
Trigger Event
dropdown menu.
3.
Cut and paste or type the desired hex code into the form.
4.
Click
Add IR Code
button to save the command
5.
Repeat for each code you wish to send.
To view and/or modify stored codes click on
View Stored Codes.
Commands may be
edited as outlined above.
