Configuration and Use
PowerPlay IPC-8000 and IPC-9000
4826 Sterling Drive, Boulder CO 80301
15-052-01-1-DOM-B
PH: 720.406.8946 [email protected] www.psaudio.com
©2010 PS Audio International Inc. All rights reserved.
Internal Website
In order to control and configure PowerPlay via the internal website the unit must indicate a local connection
with either a yellow or green IP status light. The internal website can be reached by either typing the unit’s local
IP address into your web browser or by simply typing “PowerPlay1” into your browser. The local IP address can
be found by one of the following methods:
IPC-9000 - touch the IP indicator repeatedly until the display window shows: “IP”
“###.###.###.##”
IPC-8000 - press the status button repeatedly until the display window shows: “IP”
“###.###.###.##”
If you are installing the PowerPlay in a location without outside internet access you may skip to the next section
entitled “
Internal Web Server
”.
Alternatively if you have a single PowerPlay in your home you can type “POWERPLAY1” into a web browser of
any computer on the same gateway. POWERPLAY1 is the default HOSTNAME. If you have multiple PowerPlays
in your home you may edit the HOSTNAME as outlined in the Network Settings below.
System Status
After entering the local IP address of your PowerPlay you will see the System Status page of the control
panel. From this page you may control the
Master Power
, identify outlets, control outlets or access more
advanced controls
