Introduction
4826
Sterling
Drive,
Boulder,
CO
80301
15-056-01-1
PH: 720.406.8946 [email protected] www.psaudio.com
Rev D
®
©2010 PS Audio Inc. All rights reserved.
Introduction
Owner’s Reference
PerfectWave Power Plant 10
(<+06
7:
WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPARATUS
TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, THIS APPLIANCE MUST BE
CONNECTED TO A MAINS SOCKET OUTLET WITH A PROTECTIVE EARTH CONNECTION.
The European Union has harmonized the Mains Supply Voltage at 230V~50Hz. Previously, this
nominal voltage was 220V~ for continental Europe and 240V~ for the United Kingdom. Since the
output receptacles are Nationally Approved Mains Socket-Outlets, we have to restrict the Operator
set Output Voltage Range to 220-240V~.
Unit is shipped with the Mains Output Socket-Receptacles applicable to the country of installation as
specifi ed by the customer. Please verify the marked Mains Supply ratings of the powered equipment
before making any AC connections. if there is a mix of marked Voltages (e.g. 220V, 230V and 240V),
please set the output voltage to 230V.
Explanation of Symbols found on the PerfectWave Power Plant 10
indicates compliance with European Union Legislation for relevant safety (Low Voltage Directive
2006/95/EC) and EMC (EMC Directive 2004/108/EC) requirements.
is intended to tell the user that parts inside the product are a risk of electric shock to persons.
is intended to tell the user that important operating and servicing instructions are in the papers
with the appliance.
signifi es that the instrument complies with European Union Waste Electrical and Electronic
Equipment Directive.
indicates that the unit is in compliance with the European Union Reduction of Hazardous
Substances Directive.
indicates the connector location for Ethernet connection to the network.
Warnings
Symbols Found on
the P10
ii
