PS Audio PerfectWave Power Plant 10, Руководство пользователя для владельца

Страница: 18 / 24

®
Operation Guide
Owner’s Reference PerfectWave Power Plant 10 (<+06
7:
Operation Guide
4826 Sterling Drive, Boulder, CO 80301 15-056-01-1
PH: 720.406.8946 support@psaudio.com www.psaudio.com Rev D
©2010 PS Audio Inc. All rights reserved.
Viewing Fundamental System Setup Parameters
Different from the General Setup features which can be accessed by selecting the Setup button from
the HOME SCREEN, this section identifies and instructs on primary usage settings as described
below.
To enter the SYSTEM SETUP SCREEN one must first power down the PerfectWave P10 using the
back-panel power switch. One must then reapply AC power to the PerfectWave P10 be flipping the
back-panel power switch to the “On” position. The unit will initialize for 15 to 20 seconds. After 5
seconds of initialization (see picture), the P10’s touch-screen will activate. After its activation, but
before the P10 fully initializes and enters the HOME SCREEN, the unit’s front-panel touch-screen
can be touched anywhere on its face. This will bring the user to the SYSTEM SETUP SCREEN
where the following parameters are displayed:
1. Unit ID
2. Bootloader
3. Firmware
4. Power
Meter
5. Oscillator
6. Web
7. Dimmer
Under Dimmer, five different selections can be made here to either statically set the display’s
brightness, or to employ the P10’s ambient light meter which automatically dims the display to
match the room’s illuminative levels.
a. Auto-Fast
b. Auto-Slow
c.
Low (33% intensity)
d. Medium (66% intensity)
e. High (100% intensity)
Information
Screen
13