Prusa Research Original Prusa i3 MK2S 1.75mm, Руководство пользователя

Страница: 5 / 67

7.2.8 Print speed versus print quality 32
7.2.9 USB cable and Pronterface 32
7.3 Printer addons 34
7.3.1 Different nozzles 34
7.3.1.1 Hardened steel nozzle 35
7.3.1.2 0.25mm nozzle 35
8 Advanced calibration 35
8.1 PID tuning for Hotend (Optional) 35
8.2 PINDA probe calibration/ Temp. calibration (Experimental/Optional) 36
8.3 View XYZ calibration details (Optional) 36
8.4 Linear Advance (Experimental) 38
9 Printer drivers 40
10 Printing your own models 40
10.1 Where you can get the 3D models? 40
10.2 In what program you can create your own models? 40
10.3 PrusaControl 41
10.4 Slic3r Prusa Edition 43
10.5 Bundled 3D models 44
10.6 Print in color with ColorPrint 44
10.7 Printing of non-standard models 47
10.7.1 Printing with support material 47
10.7.2 Large object printing 48
11 Materials 50
11.1-11 ABS, PLA, PETG, HIPS, PP, Nylon, Flex,Composite materials,ASA,nGen,PC-ABS 50
11.12 Dialing in new materials 57
12 FAQ - Printer maintenance and print issues 58
12.1 Regular maintenance 58
12.1.1 Bearings 58
12.1.2 Fans 58
12.1.3 Extruder drive gear 58
12.1.4 Electronics 58
12.1.5 PEI rejuvenation 58
12.2 Print surface preparation 59
12.3 Clogged / jammed extruder 59
12.4 Nozzle cleaning 60
12.5 Replacing / changing the nozzle 60
12.6 Printing problems 62
12.6.1 Layers break and split when printing from ABS material 62
12.6.2 Models contain either too much or not enough of the filament 62
12.7 Problems with finished models 62
12.7.1 Model breaks and/or is easily damaged 62
12.8 Updating printer firmware 62
13 FAQ - common issues when assembling the printer kit 63
13.1 Nozzle/print surface gap is greater in the middle than at the corners 63
13.2 Printer stops printing soon after start 64
13.3 Printer can’t read SD card 64
13.4 Loose X- and/or Y-axis belts 65
13.5 Detached cables to the heatbed 66
5