Proxomed Core Circuit, Руководство пользователя

Страница: 7 / 22

User Manual Page 7 of 22 Version 1.2
compensation materials not prone to rust. The device has two feet, which can be adapted to compensate
irregularities.
For damping, we recommend to set buffer material made of rubber, which can be purchased as accessories. Take
care in case of PVC floor that the rubber sheets and feet can cause reactions with the PVC material. Please use
appropriate cork.
Avoid hard, sudden placement of the devices.
An important prerequisite for the proper functioning of the device is the alignment with a spirit level. The devices are
for freestanding use.
The installation of the devices in high traffic areas or near doors and passageways should be avoided.
6.4 Setting-up Operation
Before setting-up please check the proper and correct condition of:

Hydraulics for visible damage, particular the applicable end mounting.

Locking pin to function, locking knob needs to engage independently.

Stability.

Bolt connections – prove the firm bonding.

Welds – visual examination.

Moving function OK.
Check before every usage:

Locking bolts for secure fixation

resistance setting on the resistance system
7 Hydraulic Resistance System
The hydraulic resistance system is available with mechanical load control. The mechanical system allows an
adjustment of the resistance with the piston by using the knob, which can be turned. Here are appropriate
for the adjustment of the load acting on bidirectional two and one-directional one knob available. Thus a
differential resistance variation for antagonistic mode is possible. The built-in piston requires a direct
connection to the lever arm. Deflections by ropes or straps are not done. The adjustment knobs of the
piston in the mechanical are free accessible.
The amount of exercises is focused on the area of endurance muscle training. The stress intensity is at the
right resistance system according to the speed of the executed movement. The faster the training speed is
the greater the strain on the trainees. This is to be considered for training. An explosive training is to be
avoided in any case.
An increased training speed also leads to increased stress perception during exercise.