background image

User Manual 

Page 5 of 22  

Version 1.2 

2.3

 

General Warnings 

 

-

 

The training devices may be used only in areas, in which access and supervision is regulated specifically by the 
owner. The extent of supervision is dependent on the users and that of their degree of reliability, age, experience, 
training, etc. The equipment must be supervised by qualified persons (e.g., Athletic Trainers, physical therapists, 
licensed or instructed Coach) and may be used after extensive training by appropriate persons. 

-

 

The use of additional resistors (additional weights, manipulation of hydraulics) is in any form not allowed and will 
void the warranty and guarantee claims. 

-

 

The explosive strength training isn’t allowed. The training should be performed in a symmetrical moderate speed 
to avoid pressure peaks in the training system and on the user. 

-

 

The loading is focused on the strength endurance training. The intensity level is depending on the speed of 
movement by this resistance system. The training speed faster, the load will be higher. An explosive training 
should be avoided in any case. 

-

 

This resistance system is specially designed for training of strength endurance. Exercising in higher load ranges is 
possible. The maximal strength training is not provided on this machine,  

-

 

Disabled people, children and people with heart and circulatory problems may not train without assistance or 
supervision. 

-

 

Children should not be unattended neither may not stay close to the devices nor use the devices

-

 

During training no one should be near the moving parts (hydraulic, piston, lever arms, etc.). A safe distance 
(clearance) of at least 1.3 meters needs to be guaranteed to avoid any risk of injury by swinging parts (especially 
during extension of Hip device). The units of left and right hip extension need to be placed directly, but with 
suitable space for the implementation of the exercise, close to a wall. 

-

 

Only use the device as intended described in chapter 9. 

-

 

If any malfunction happens at a device, it needs to be left and may not be used anymore. The unit is clearly to be 
indicated that it is out of order to prevent an unauthorized use of the defective device. The failure should be 
identified and reported to the manufacturer or dealer responsible in your country. 

-

 

Failures, which affect the function of the machine or even can cause an injury, have to be repaired, otherwise 
liability cannot be accepted. 

-

 

Do not grip with the hands between moving parts. 

-

 

No adjustments may stick out, which can hinder the movement of the athlete. Dangerous spots are indicated with 
following plate: 

 

 

Caution 

Moving Parts 

Risk of Injury

 

 

 
 

Ensure your own safety by taking care of following points: 

-

 

Before starting any exercise it needs to be ensured that all locking pins are locked and tight completely. During 
exercising adaptations may not be done at any adjustments. 

-

 

During the training the athlete should wear light-weight, breathable and tight-fitting clothing. 

-

 

Please stop the training on the devices, if the athlete feels uncomfortable. If sickness, dizziness and headache 
occurs consult the medical doctor. 

-

 

Training on the devices may only be carried out under appropriate supervision. 

-

 

Before starting a training please take care of the proper biomechanical adjustments with attention to the pivot 
point, joint alignment. Pay attention to the tight locking of the adjustments. No adjustments may stick out.  

-

 

The settings on the devices should be made with due care. Please read the relevant parts in the manual.  

-

 

The training may not be achieved as an explosive power training. The training needs to be carried out smoothly in 
uniform speed to prevent high pressure peaks. 

 

 

2.4

 

Safety Note 

-

 

It is to ensure, in particular during changing the position of the device without dismantling that the devices are 
positioned stabile on the even surface. 

Содержание Core Circuit























Отзывы: