7
Place your projector correctly
Use your projector at specified location in correct way. Invalid projector location may shorten life
-
cycle of lamps or even lead to severe incidents or fire. Your projector may project upward or down
-
ward at location perpendicular to the horizon. When installing your projector inclined downward,
place it in a bottom up position.
DO NOT install your projector in ways as illustrated below.
DO NOT place your projector as
illustrated above.
DO NOT tilt your projector
more than 20 degrees.
20
0
20
0
Note:
● Enable the “Ceiling” function if flip over screen is required.
Safety operation guideline
Note:
Precautions on ceiling mount
racket installation:
●Get qualified technician to install the ceiling
mount racket.
●
Warranty of your projector does not cover
hazards and damage caused by using ceil-
ing mount rackets provided by unauthorized
dealers.
●
Remove the ceiling mount racket when it is
not in use.
●
Apply torque driver instead of power driver or
impact driver in your projector.
M6x10
10mm
M6x10
10mm
Torque: 1.40 Newton.m
