52
设置
设置
3 / 3
IRIS on
㉓
Select this function to change image contrast.
On .......... Enable IRIS function for better image
contrast.
Off .......... Disable IRIS function.
IRIS
This function keeps abnormal operation of your
projector during its use for troubleshooting. It
contains the latest 9 warning messages in time
sequence.
This function resets all your settings to Factory Default except the user Logo screen, PIN Code
Note:
Records contained in the log will be erased
after a Factory Default reset.
Warning Log
Factory Default
设置
Setting
Filter counter 1hour
Timer 200hour
Reaet the filter counter
Filter counter
Timer: Filter cleaning cycle.
after is has been cleaned.
Note:
Set this function to On when your projector is in use in environment of altitude above 1400 meter.
Filter counter
You may set up fan control function in the Setting menu. Set up fan speed according to the altitude
your projector is operating.
Off .......... Normal speed Set this function to Off when your projector is in use in environment of low
altitude.
On .......... The fan runs at speed faster than that of the Off mode. Set this function to On when your
projector is in use in environment of high altitude, as its cooling effect gets lower.
High Land
Setting
