Proxim RangeLAN2 7401, Руководство пользователя

Страница: 45 / 101

39
4. DOS Installation
This chapter describes the installation of the DOS driver software
and utilities once the hardware is installed.
Installing Drivers Using RL2SETUP
If your Network Operating System (NOS) does not have an
installation procedure, you may use RL2SETUP to install the
ODI or NDIS driver software.
Put the RangeLAN2 7420 DOS driver diskette in a floppy drive
on your computer and run the setup program:
C:\> A: (or B:)
A:\> RL2SETUP
If you wish to install the ODI driver, choose ODI Peer-to-Peer or
ODI with Access Point (depending on whether or not the station
will communicate through a RangeLAN2 Access Point) as the
NOS and then choose <Install Files>. If you wish to install the
NDIS driver, choose Generic NDIS Peer-to-Peer or NDIS with
Access Point (depending on whether or not the station will com-
municate through a RangeLAN2 Access Point) as the NOS and
then choose <Install Files>. Set the directory name to match that
of the NOS directory. The proper driver and configuration file
will be installed. Next, choose <Configure> and set the proper
software options.