Proxim RangeLAN2 7401, Руководство пользователя

Страница: 34 / 101

28
If you receive an error message stating that the RangeLAN2 7420
PC Card is not properly installed following the restart in Step #11
above, confirm that there is a “Proxim RangeLAN2 7400 PC
Card Network Adapter” entry under the Device Manager’s
Network Adapters heading. To open the Device Manager,
double-click the System icon in the Control Panel and click the
<Device Manager> button found under the Hardware tab.
If there is no Proxim RangeLAN2 Card Network Adapter entry,
then the driver has not been properly installed. In this case, there
should be a “Proxim LAN_PC_Card” entry under the Device
Manager’s Other Devices heading. Right-click this entry and
choose “Uninstall...” from the drop-down menu. Remove the PC
Card from the PCMCIA slot and reinsert it. The New Hardware
Wizard will automatically detect the card and begin the installa-
tion process. Refer to the instructions earlier in this section to
install the Windows 2000 driver.
If there is a Proxim RangeLAN2 7400 Card Network Adapter
entry listed with an “!”, then most likely the card is not working
because of a resource conflict; the RangeLAN2 PC Card is trying
to use an Interrupt Request (IRQ), I/O Base Address, or Memory
Range which is either already in use or not available for use by
the card.
Double-click the Device Manager entry to view the properties for
the card. Click the Resources tab to see what system resources, if
any, the card is trying to use. Manually change the resource
settings for the card to find available resources which the card can
use. Click <OK> for these new settings to take effect; you may
be prompted to restart the computer. After the computer restarts,
the RangeLAN2 Windows 2000 driver should be loaded success-
fully. However, if you continue to experience installation prob-
lems, see Chapter 8 for more troubleshooting suggestions.