Configuration
Tsunami MP.11 5012/5054-SUI Installation and Management
Network Parameters
67
2. Enter the following parameters and click
Add
:
•
Start IP Address:
Indicates the starting IP address that is used for assigning address to hosts on the Ethernet
side in the configured subnet.
•
End IP Address:
Indicates the ending IP address that is used for assigning address to hosts on the Ethernet side
in the configured subnet.
•
Default Lease Time:
Specifies the default lease time for IP addresses in the address pool. The value is 3600-
86400 seconds.
•
Max Lease Time:
The maximum lease time for IP addresses in the address pool. The value is 3600-86400
seconds.
•
Comment:
The comment field is a descriptive field of up to 255 characters.
Edit/Delete Entries in the DHCP Server IP Pool Table Entries
1. Click
Edit/Delete Table Entries
to make changes
2. Enter your changes and click
OK
.
Spanning Tree (Bridge Mode Only)
NOTE:
The unit must be in Bridge mode to configure Spanning Tree.
This protocol is executed between the bridges to detect and logically remove redundant paths from the network.
Spanning Tree can be used to prevent link-layer loops (broadcast is forwarded to all port where another device may
forward it and, finally, it gets back to this unit; therefore, it is looping). Spanning Tree can also be used to create redundant
links and operates by disabling links: hot standby customer is creating a redundant link without routing function.
Содержание 5012-SUI
Страница 1: ...Tsunami MP 11 Installation and Management Guide Model 5012 SUI Model 5054 SUI Version 4 0 0...
Страница 41: ...System Overview Tsunami MP 11 5012 5054 SUI Installation and Management Virtual Local Area Networks VLANs 41...
Страница 78: ...Configuration Tsunami MP 11 5012 5054 SUI Installation and Management SNMP Parameters 78...