Proxim 5012-SUI, Руководство по установке и управлению

Страница: 15 / 158

Installation and Initialization Tsunami MP.11 5012/5054-SUI Installation and Management
Hardware Overview
15
LED Indicators
The top panel of the unit has the following LED indicators:
Power-over-Ethernet
The 5012/5054-SUI comes with a 110/220 VAC Power Supply that has a barrel plug for the power jack in the back of the
unit. The 5012/5054-SUI is also equipped with a Power-over-Ethernet (PoE) module so it can also be powered through a
PoE adapter such as the ORiNOCO 1-Port Active Ethernet DC Injector (ordered separately). Using PoE, you can provide
electricity and wired connectivity to the unit over a single Category 5 cable. If you use PoE, there is no difference in
operation; the only difference is the power source.
• The PoE integrated module receives –48 VDC over a standard Cat5 Ethernet cable.
• Maximum power supplied to the 5012/5054-SUI is 11 Watts. The units typically draw less than 9 Watts.
• You must have an PoE DC Injector connected to the network to use Active Ethernet. The DC Injector is not a repeater
and does not amplify the Ethernet data signal.
• If connected to an PoE DC Injector and an AC power supply simultaneously, the radio draws power from PoE.
• The cable length between the PoE DC Injector and the radio should not exceed 100 meters (approximately 325 feet).
Reload button
Reset button
RS-232 Ethernet Power
Ethernet Wireless Power