Introduction
Tsunami MP.11 5012/5054-SUI Installation and Management
Management and Monitoring Capabilities
12
Management and Monitoring Capabilities
There are several management and monitoring interfaces available to the network administrator to configure and
manage the unit:
Web Interface
The Web interface (HTTP) provides easy access to configuration settings and network statistics from any computer on
the network. You can access the Web interface over your network, over the Internet, or with a crossover Ethernet cable
connected directly to your computer’s Ethernet port.
Command Line Interface
The Command Line Interface (CLI) is a text-based configuration utility that supports a set of keyboard commands and
parameters to configure and manage the 5012/5054-SUI unit. You enter command statements, composed of CLI
commands and their associated parameters. You can issue commands from the keyboard for real-time control or from
scripts that automate configuration. See “Command Line Interface” in the
Tsunami MP.11/QB.11 Reference Manual
for
more information.
SNMP
In addition to the Web interface and the CLI, you also can manage and configure your unit using the Simple Network
Management Protocol (SNMP). Note that this requires an SNMP manager program, such as Hewlett Packard’s
OpenView or Castelrock’s SNMPc. The 5012/5054-SUI supports several Management Information Base (MIB) files that
describe the parameters that can be viewed and configured using SNMP:
mib802.mib
orinoco.mib
rfc1213.mib
rfc1493.mib
rfc1643.mib
Proxim provides these MIB files on the CD included with your unit. You must compile one or more of these MIB files into
your SNMP program’s database before you can manage your unit using SNMP. See the documentation that came with
your SNMP manager for instructions about how to compile MIBs.
NOTE:
When you update the software in the unit, you must also update the MIBs to the same release. Because the
parameters in the MIB may have changed, you will not otherwise have full control over the features in the new
release.
The enterprise MIB (orinoco.mib) defines the read and read/write objects you can view or configure using SNMP. These
objects correspond to most of the settings and statistics that are available with the other management interfaces. See the
enterprise MIB for more information; the MIB can be opened with any text editor, such as Microsoft Word, Notepad, and
WordPad. See
for setup procedures.
IMPORTANT!
Using a serial connection, you can access the CLI of the unit through a terminal emulation program such as
HyperTerminal. (See “HyperTerminal Connection Properties” in the
Tsunami MP.11/QB.11 Reference Manual
.)
For all other modes of connection, you will need the IP address of the unit in order to use the Web Interface,
SNMP, or the CLI via telnet. See
Setting the IP Address with ScanTool
for more information.
Содержание 5012-SUI
Страница 1: ...Tsunami MP 11 Installation and Management Guide Model 5012 SUI Model 5054 SUI Version 4 0 0...
Страница 41: ...System Overview Tsunami MP 11 5012 5054 SUI Installation and Management Virtual Local Area Networks VLANs 41...
Страница 78: ...Configuration Tsunami MP 11 5012 5054 SUI Installation and Management SNMP Parameters 78...
