manualshive.com logo in svg

Prowinch PWCD Series, Руководство пользователя

Поделиться
Скачать
Prowinch PWCD Series Скачать руководство пользователя страница 50

Mitsubishi Meiki Engine

51

Version 1.0 | 51

Speed control lever 

& Engine Switch

Choke lever

Recoil start

Starting with the elec-

tric-starter (GT600)

Fuel cock

Open the speed control lever a 
little toward the high-speed side. 

Cock type without strainer

Close the fuel cock.

Cock type with strainer cup

•  Close the choke fully during 
cold weather or when the engine 
is hard to start.
•  Open the choke partially or 
fully during hot weather or when 
the engine has warmed up.

•  Hold onto the starter grip and 
lightly pull it until the compression 
position is reached and then pull 
swiftly from this position.
•  Slowly return the starter grip to 
its original position after the engine 
starts.

•  Starting with the electric-starter 
( optional specification/GT600)
•  Tum the key switch to the 
START(e)) position.
•  If the engine does not start after 
running of the electric starter for 5 
seconds, wait 5 seconds before try-
ing to start again.
•  After turning the switch to the 
START(6) position and releasing the 
key switch will automatical ly return 
to the ON (I) position.

Содержание PWCD Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды