manualshive.com logo in svg

Prowinch PWCD Series, Руководство пользователя

Поделиться
Скачать
Prowinch PWCD Series Скачать руководство пользователя страница 15

16

Specifications

Version 1.0 | 16

PWCG120  Lever Instructions Diagram

7. MAINTENANCE OF THE WINCH
It is recommended that the Winch be used with a certain frequency in order to maintain
all internal parts lubricated. Get it going and go through all the gears both ways.
This ensures that all components are in good condition so you can trust
Winch when you need it. Contact Prowinch® for technical assistance, spare parts and
repairs.

After being inactive for more than 6 months and in order to ensure the proper functioning of the
winch, careful examination and inspection by operators will be necessary
trained in maintenance.

Keep the winch clean in a dry place, free from dust and / or harmful pollutants and
a temperature between 0º and 40º.

Make sure the clutch is totally engaged before starting any winch operation.
Stay clear and away from raised loads.
Stay clear of cable while pulling do not try to guide cable.
A min. of wraps of cable around the drum.

Содержание PWCD Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды