Prowinch PWCD Series, Руководство пользователя

Страница: 47 / 62

48
Mitsubishi Meiki Engine
Version 1.0 | 48
11.
Oil gauge & oil filler cap
12.
Oil drain plug
13.
Power take off shaft
14.
Emission label
3.4 Fuel and Engine Oil
Fuel
Engine Oil
• Use clean, fresh, unJeaded gasoline. (Do not use leaded gasoline.)
• Use gasoline within 30 days of purchase. Do not use old gasoline. Doing so could cause problems.
• Do not mix oil into the gasoline.
• Do not overflow the gasoline when filling the fuel tank. (Leave several centimeters of space at the top of the
tank.)
Flame and heat can cause gasoline to explode. Be sufficiently careful
of flame and heat when handling gasoline.
Engine is shipped from Mitsubishi Heavy Industry Ltd. without oil. Before starting
the engine, be sure to conduct an oil inspection by following the instructions given
below.
1.
Place the engine on a level surface when adding oil and conducting inspections.
2.
Check the oil level without the oil gauge screwed in.
3.
Fill the oil up to the F-level of the oil gauge (correct level).
4.
Before starting the engine, tightly screw in the oil gauge.
5.
Replace or add engine oil following the table below.
6.
For oil, use high-quality pure API class oils with a grade of SE or higher.
7.
Do not add commercial additives to the recommended oil. Do not mix gasoline into the oil.
8.
When using multiple grade oils, the amount of oil consumption will increase, so check the oil level more frequently
than single grade oil.
14
11
12
13