Prowinch PWCD Series Скачать руководство пользователя страница 18

Страница: 18 / 62

Honda Engine

Version 1.0 | 19

ENGINE SAFETY

Honda engines are designed to give safe and dependable service if oper ated according to instruc-

tions. Read and understand this Owner's Manual before operating the engine. Failure to do so could
result in per sonal injury or equipment damage.

To prevent fire hazards and to provide adequate ventilation, keep the engine at least 1 meter (3

feet) away from buildings and other equip ment during operation. Do not place flammable objects
close to the engine.

Children and pets must be kept away from the area of operation due to a possibility of burns from

hot engine components or injury from any equipment the engine may be used to operate.

Know how to stop the engine quickly, and understand the operation of all controls. Never permit

anyone to operate the engine without proper instructions.

Gasoline is extremely flammable and is explosive under certain conditions.

Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames or sparks in

the refueling area or where gasoline is stored.

Do not overfill the fuel tank. After refueling, make sure the tank cap is closed properly and securely.

Be careful not to spill fuel when refueling. Fuel vapor or spilled fuel may ignite. If any fuel is spilled,

make sure the area is dry before starting the engine.

Never run the engine in an enclosed or confined area. Exhaust contains poisonous carbon monoxide

gas; exposure may cause loss of con sciousness and may lead to death.

10.

The muffler becomes very hot during operation and remains hot for a while after topping the

engine. Be careful not to touch the muffler while it is hot. To avoid severe burns or fire hazards, let the
engine cool before transporting it or storing it indoors.

Содержание PWCD Series































































Результаты поиска

Содержание PWCD Series

Отзывы:

Бренды по названию

Популярные бренды

Prowinch PWCD Series, Руководство пользователя

Результаты поиска

Содержание PWCD Series

Отзывы:

Бренды по названию

Популярные бренды