Proware SN-3163S3H-QX, Руководство пользователя

Страница: 184 / 237

SAS / SATA II NAS System
184 User Manual
8.5.5 Serial Ports tab
Com1 and Com2 Serial ports can be configured in this tab for specific application. Press
"Edit".
Com1
Supported Applications are: NAS Device Mgr or proNAS HA
Com2
Supported Applications are: UPS or proNAS HA
If you set Com2 to UPS, you can select between two supported
UPS Modes: dumb
mode or smart mode.
If you choose dumb mode, you don't have to configure the detail setting about vendor
and cable. If you choose smart mode, proNAS supports three
UPS Vendor: (a) APC,
(b) BeamTech, and (c) HyperPro. Select the UPS vendor then set the UPS Model and
Cable Model . The only Beamtech UPS model supported is SSpro 650. The only
HyperPro UPS model supported is 1410HP. APC has many models supported. APC cable
models are: simple, smart, ether, usb, and snmp
Shut Down delay (Min): the time to shutdown system after power fail
SNMP IP: the IP address of APC UPS. This is enabled when cable model is set to snmp.
Auto Shutdown UPS (APC only): automatically shutdown system after power fail;
APC UPS only
After completing the settings, press "Save" button.