Proware SN-3163S3H-QX, Руководство пользователя

Страница: 175 / 237

SAS / SATA II NAS System
User Manual 175
The Duplication tab information is shown below.
Execute Day: Specifies whether the scheduled task is to run on this day.
Execute Time: Once - Specifies the time of the day the scheduled task create
the snapshot.
Every - Specifies how often the scheduled task is to be repeated.
You can also select the starting time and the ending time.
Destination
Path: This will be the location where your duplication files will be saved.
The default path will be the path of the share itself. You can
change the path to the other shares except home and public.
Duplication will follow the ACL settings of the destination share. If
you set the destination of your home duplication to a public share
then anybody can access that folders, so please be warned!
Snapshot
Numbers: Specifies the total number of snapshots that can be created. The
maximum total number of duplication a share can have is 256.
Note: The destination space must be larger than the source.
proNAS will check only the destination volume size, not the share
usage. Be sure that the available space on the destination is
reasonably big enough to accommodate any changes in the source.
Home duplication is a special case. If the destination path of the
home folder is set to the home itself, its duplication files will only
be accessible via NFS or telnet service.
Create
Duplication: This button allows you to create duplication
manually.
Delete All: This button will remove all the duplication files of
this share on the current destination path.
Enable/Disable
Scheduled: This button allows you to enable or disable a
scheduled task.
Get List: This button allows you to get the lists of
duplications on the current destination path.