Proware PW-RN401 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 92

background image

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.



Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Only 2.412GHz~2.462GHz is allowed to be used in USA, which means only channel 1~11 is
available for American users to choose.

NOTE:  THE  MANUFACTURER  IS  NOT  RESPONSIBLE  FOR  ANY  RADIO  OR  TV
INTERFERENCE  CAUSED  BY  UNAUTHORIZED  MODIFICATIONS  TO  THIS  EQUIPMENT.
SUCH  MODIFICATIONS  COULD  VOID  THE  USER’S  AUTHORITY  TO  OPERATE  THE
EQUIPMENT.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be installed to provide a

«
1
2
3
4
...
»

Содержание PW-RN401





























































































Отзывы:

Нет отзывов

Похожие инструкции для PW-RN401

Vb-C60 - Ptz Network Camera

Бренд: Canon Страницы: 30

Бренд: JCG Страницы: 3

Бренд: T&D Страницы: 122

Бренд: LaCie Страницы: 22

DG834GT - 108 Mbps Super G Wireless ADSL Router

Бренд: NETGEAR Страницы: 2

Бренд: Moxa Technologies Страницы: 2

ADSL2+ Wireless MIMO Router

Бренд: Ace Страницы: 64

Бренд: ZoneVu Страницы: 15

Elinx EIR510 Series

Бренд: B&B Electronics Страницы: 2

Бренд: Casablanca Страницы: 13

Бренд: Solwise Страницы: 231

DUAL Nx56/64 1200142L1#

Бренд: ADTRAN Страницы: 48

Бренд: Black Box Страницы: 62

CU8210-D001-0200

Бренд: Beckhoff Страницы: 25

OmniSwitch 6624

Бренд: Alcatel Страницы: 546

Бренд: Allied Telesis Страницы: 44

Бренд: ASTRO Страницы: 12

TS-U100 - NAS Server - USB

Бренд: TRENDnet Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды