PW-RN401/PW-RN401D
150M Wireless N Router
- 46 -
2. Select a common application from the
Common Applications
drop-down list, then the
Trigger Port
field and the
Incoming Ports
field will be automatically filled. If the
Common
Applications
do not have the application you need, enter the
Trigger Port
and the
Incoming Ports
manually.
3. Select the protocol used for Trigger Port from the
Trigger Protocol
drop-down list, either
TCP
,
UDP
, or
All
.
4. Select the protocol used for Incoming Ports from the
Incoming Protocol
drop-down list,
either
TCP
or
UDP
, or
All.
5. Select
Enable
in
Status
field.
6. Click the
Save
button to save the new rule.
Figure 4-32 Add or Modify a Port Triggering Entry
To modify or delete an existing entry:
1. Click the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click the
Save
button.
Click the
Enable All
button to make all entries enabled.
Click the
Disabled All
button to make all entries disabled.
Click the
Delete All
button to delete all entries.
Note:
1. When the trigger connection is released, the corresponding opening ports will be closed.
2. Each rule is allowed to be used only by one host on LAN synchronously. The trigger
connection of other hosts on LAN will be refused.
3. Incoming Port Range cannot overlap each other.
