Proware Epica, Руководство пользователя

Страница: 43 / 240

NAS System
User Manual 43
2. Enter Array Name, Volume Name, select the disk drives to be included in
the Array, and select RAID Level, Stripe Size, and Block Size. Click
“Submit” when done.
Option Description
Array Name
The name of the array you want to assign to the
Array. It should not exceed 20 characters.
Volume Name
The name of the volume you wan to assign to the
Volume. After mapping the Volume as LUN, it will
appear as a disk device to the host.
RAID Level
Select the RAID Level you want the Array to use.
The RAID level option will depend on the number of
disk drives selected.
Stripe Size
This parameter sets the size of the stripe written to
each disk. You can set the stripe size to 8k, 16k,
32k, 64k, 128k, 256k or 512k.
Block Size
Use this option to enable creating Volume over
2TB.
For Windows OS, such as Windows 2000, 2003:
Use 1KB , 2KB or 4KB.
For 64bit LBA mode, such as Windows 2003+SP1
or later versions, Linux 2.6 or later versions:
Use
512 bytes . Due to LSI chip limitation,
16 Byte CDB option must run at U320 mode.