Proware Epica, Руководство пользователя

Страница: 37 / 240

NAS System
User Manual 37
4.3 Configuration through proRAID Manager GUI
The RAID subsystem can be managed through the controller’s Ethernet connection.
Any PC on the network to which the RAID subsystem is connected can manage the
subsystem using proRAID Manager. proRAID Manager is web browser-based
Graphical User Interface (GUI) that is supported on many OS platforms.
This chapter describes the steps that you need to start up ProRAID Manager and
how to use it on your system.
NOTE: Flash Player 10 or later version must be installed in the PC
which will be used to manage the RAID subsystem.
4.3.1 Login to proRAID Manager
Open a web browser and enter http://xxx.xxx.xxx.xxx, where xxx.xxx.xxx.xxx is the IP
address of the RAID subsystem. The Login screen will be displayed.
Enter the subsystem name (you can use any name to identify the subsystem you are
going to manage) and the password.
NOTE: The default IP address of the RAID system is 172.16.0.2.
The IP address can be verified from LCD panel; select System
Config and then Ethernet Config. The default subsystem password
is 00000000.
NOTE: The session timeout limit is 10 minutes. When the GUI is
not used within 10 minutes, user will be logged out automatically.