User Manual
sens07vest
Page 10
May 2020
2
sens07 inflator manual
2.1
Switching between profiles
Pressing the button in dry condition for more than 2 seconds will
switch to the next profile specified in the sens07 app. A successful
change of the profile number is confirmed by a short flash of both
LEDs ( green and red), followed by the profile number which is
identical to the self-test:
•
0 flash: Manual mode (off)
•
1 flash: Profile 1
•
2 flashes: Profile 2
•
3 flashes: Profile 3
Note: Please verify configuration using the sens07 app in case you
can’t change the profile as expected.
User Manual
sens07vest
May 2020
Page 11
2.2
Suspend upcoming inflation while diving
Pressing the self-test button when the sens07vest is submerged
will suspend (freeze) the risk inflation countdown for the specified
suspend time. This time can be defined by the
sens07 app.
The suspend button works under water only. An active suspension
will be cleared when reaching the Safe Zone.
The suspend button doesn’t influence the blackout countdown.
This feature can be enabled or disabled using the sens07 app. When
disabled, pressing the button will have no effect underwater.
2.3
Manual inflation handle
Pulling the manual inflation handle will inflate the bladder in any
situation (emergency).
The manual inflation handle is an emergency device and works
without any electronic, configuration or actuator module.
