ProVisual PTZ-501C – PTZ Keyboard Controller Manual
www.provisualusa.com
9 |
P a g e
•
Save setting
After finishing the setting, press the
【
ENTER
】
keyboard to save; TFT will display
“Success”.
•
Back previous menu
Press
【
PREV
】
keyboard, or turn the joystick to left, it will back to previous menu1
4.1 - Keyboard Parameter Setup
4.1.1 - Dome ID Setup
1 -
Enter the main menu
TFT will display (picture4.1.1-1)
Figure 4.1.1-1
2 -
Press
【
1
】
to selects the keyboard setting as TFT (Picture4.1.1-2)
Figure 4.1.1-2
3 -
Press
【
1
】
again will show the picture (Picture4.1.1-3)
Figure 4.1.1-3
4 -
Press
【
1
】
to select the ID Setting (Picture4.1.1-4)
Figure 4.1.1-4
Use the Number. Keys on the keyboard to select the camera ID in the range (1-64); and then press the
【
Enter
】
to save, the screen will
display Success as picture (4.1.1-5).
Figure 4.1.1-5
If the NO you input outside the range1~64, it will display Error as picture (4.1.1-6)...
Figure 4.1.1-6
1. Keyboard setup
2. Dome setup
3. Protocol select
4. System setup
5 .Exit menu
1.
Set KB ID(1-64):-
2.
Set Baudrate:2400bps
3.
Joy calibrate
4.
About keyboard
1. Set KB ID (1-64):
1. Set KB ID (1-64):-
Success
Error
