ProVisual PTZ-501C – PTZ Keyboard Controller Manual
www.provisualusa.com
11 |
P a g e
Item 1: Save preset: item 2: Show the preset; Item 3: clear the preset
Press
【
1
】
enter the preset, you can input the preset NO as picture (4.2.1-3) show
Figure 4.2.1-3
After enter the preset menu you can use navigate key control the dome directly, and input the preset NO to save as the picture 4.2.1-4 show.
And on the TFT screen will display SUCCESS.
Figure 4.2.1-4
Press
【
Prev
】
back to previous men.
Warning
：
Press
【
2
】
enter the “Show the preset” menu as picture 4.2.1-5
Figure 4.2.1-5
Input the Preset NO and press the
【
ENTER
】
to call it, and the TFT will display “Success”. Use the navigate
Key or
【
PREV
】
back to previous menu.
Press
【
3
】
enter the “clear the Preset” to clear preset information as picture 4.2.1-6 show.
Figure 4.2.1-6
Input the PRESET NO which you want to clear, and press the Enter to clear it, and it will show “Success" and back to previous men.
4.2.2 - Dome Scan Setup
Enter the menu like picture (4.1.1-1)
Press
【
2
】
enter the dome setting menu as the picture (4.2.1-1).
Press
【
2
】
again to enter the dome scan setting as picture 4.2.2-1.
Figure 4.2.2-1
Dome scan setting include the: Left limit, Right Limit and Run scan
Press
【
1
】
to set the Left limit as picture 4.2.2-2 show.
Preset num:
(1-128)
Press PREV to back
Success!
While enter the dome preset menu, the keyboard navigate keyboard can directly
control the dome and lens control zone also can control the dome’s lens.
。
Preset num:
(1-128)
Press PREV to back
Preset num:
(1-128)
Press PREV to back
1. Set left limit
2. Set right limit
3. Run scan
