ProVisual PTZ-501C – PTZ Keyboard Controller Manual
www.provisualusa.com
10 |
P a g e
5 -
Press
【
PREV
】
or use the shake toward to LEFT to back to previous menu.
4.1.2 - Keyboard Baud Rate Setup
Enter the main menu as the TFT picture (4.1.1-1) show.
Press
【
1
】
will show on the TFT as picture (4.1.1-2)
Press
【
2
】
select the Baud Rate setting, as Picture (4.1.2-1)
Figure 4.1.2-1
2400bps \ 4800bps \ 9600bps \ 19200bps is available, you can select the Baud rate you need and press the
【
ENTER
】
to save. If you
operate success, the screen will show “Success”.
Press
【
PREV
】
or use the shake toward to LEFT to back to previous menu.
Warning
：
4.1.3 - Information Display
Enter the menu, TFT will display as 4.1.1-2press
【
4
】
, TFT will display as (figure 4.1.4-1).
Figure 4.1.4-1
Press
【
PREV
】
or use the joystick turn LEFT back to previous menu. The keyboard menu will display all the keyboard setting
information; include the keyboard model, keyboard ID, Protocol and the Baud rate.
4.2 - Dome Setup
4.2.1 - Preset Setup
Enter the main menu as picture (4.1.1-1) and press
【
2
】
to enter the dome setting menu as picture (4.2.1-1). This part you can set the
follow function: Preset, Scan, Pattern, and Tour.
Figure 4.2.1-1
Press
【
1
】
enter the dome Preset function setting as picture (4.2.1-2).
Figure 4.2.1-2
2. Set Baudrate: 2400bps (4800bps/9600bps/19200bps)
If connect to the matrix, it must select the 9600bps. And is multi keyboard to work, it must
use 9600bps or 19200bps
Version: 1.00
KB ID: 001
Protocol: Pelco-d
Baudrate: 2400bps
1.
Set dome preset
2.
Set dome scan
3.
Set dome pattern
4.
Set dome tour
5.
1. Save preset
2. Show preset
3.
Clear preset
