BTP-2100E USER MANUAL
General Safety Information
Before installing and using the printer, please read the following items
carefully.
Safety Labels
The THP (THP) is calorific and its temperature is high when
printing or just after the operation, so please don’t touch it and
its peripherals for safety purpose.
Due to the static, please don’t touch the surface of THP and
connecting parts to keep it from damages.
Caution
z
Install the printer on a flat and stable place.
z
Reserve adequate space around the printer so that the operation and maintenance
can be performed conveniently.
z
Keep the printer far away from water source and do not expose the printer to direct
sunlight, strong light and heater.
z
Do not use or store the printer in a place exposed to heat of fire, moisture and
serious pollution.
z
Do not place the printer on a place exposed to vibration and impact.
z
No dew condensation is allowed to the printer. In case of such condensation, do
not turn on the power until it has completely gone away.
z
Connect the AC adaptor to an appropriate earthing outlet. Avoid sharing a single
outlet with large power motors and other devices that may cause voltage
fluctuation.
z
Disconnect the AC adapter when the printer is deemed to spare for a long time.
z
Don’t spill water or other electric materials into the printer. In case that this
happens, turn off the power immediately.
z
Do not allow the printer to start printing when there is no recording paper in,
otherwise the THP and platen roller will be damaged.
z
To ensure print quality and normal lifetime, use recommended paper and ribbon or
materials with same quality.
z
Turn off the printer before connecting or disconnecting interfaces connectors to
prevent control board from damages.
z
Set the print darkness to a lower grade as long as the print quality is acceptable.
This will help to keep the THP durable.
z
Do not disassemble the printer without permission of a technician, even for
repairing purpose.
z
Keep this manual carefully at hand for ready reference.
- 1 -
