BTP-2100E USER MANUAL
Press “CANCEL” first to confirm the change of
Auto. Paper Feed after entering the simple
mode.
Error LED flash
CANCEL
Continue to press “CANCEL” to switch between
Auto. Paper Feed mode and non-auto paper
feed mode.
Different
compounding of the
three LEDs means
different setting.
FEED+
CANCEL
Press “FEED” and “CANCEL” to save the
modified parameter and exit the simple
parameter setting mode and back to standby
status.
Power LED always
light.
Table 2.4
2) Complex Parameter Settings
Key Key
Functions LED
Status
PAUSE+
CANCEL
Press “PAUSE” and “CANCEL”, release
after the buzzer sound once, start to print
complex parameter setting menu and
enter complex parameter setting mode.
POWER LED always
light.
STOP LED not light.
ERROR LED always
light.
FEED
Press “FEED” to turn the main menu
content withershins or change parameter
of current menu item.
POWER LED flashes
once.
PAUSE
Press “PAUSE” to print current setting
items to be changed. After that, press
“PAUSE” to print the changed setting
items and back to the first item of the
setting menu.
STOP LED flashes
once.
CANCEL
Press “CANCEL” and turn main menu
content items deasil or change the
parameter of current menu item.
ERROR LED flashes
once.
FEED+
CANCEL
Press “FEED” + “CANCEL” to save the
changed parameter and exit complex
setting mode, then back to standby
status.
POWER LED always
light.
Table 2.5
Loading paper
1) Push up the top cover with two hands according to the arrows in figure
2.1 and open it.
2) Press down Print-head lift button. After ribbon holder is lift, turn it at the
angle shown as below (stop it until a slight sound “pa” is prompted) (see
figure 2.2).
- 8 -
