English
7
Notes:
• If USB is selected when no device inserted, the display
shows “NO MEDIA” .
• If B/TOOTH AUDIO is selected when no bluetooth
connected, the display shows “NO AUDIO”.
Switching the display
1. Press the [DISP] button to select the desired
display.
2. Each time you press the [DISP] button, the
display switches in the following order:
For USB mode:
Main Display (File Name) Folder Name
Title Name Artist Name Album Name
Clock Display Main Display...
For Bluetooth Audio mode:
Main Display (Title Name) Artist Name
Album Name Clock Display Main Display...
For Tuner mode:
Main Display (Radio band)
Clock Display
*
Once selected, the preferred display
becomes the default display. When a
function adjustment such as volume is
made, the screen will momentarily switch
to that function’s display several seconds
after the adjustment.
4. OPERATIONS
Note: Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 4.
Basic Operations
CAUTION
!
Be sure to lower the volume before switching
off the unit power or the ignition key. The unit
remembers its last volume setting. If you switch
the power off with the volume up, when you
switch the power back on, the sudden loud
volume may hurt your hearing and damage
the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time without
running the engine. If you drain the car’s battery too
far, you may not be able to start the engine and this
can reduce the service life of the battery.
1. Press the [ ] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch to
display that mode.
3. Press the [ ] button more than 1 second to
turn off the power for the unit.
Selecting a mode
1. Press the [SRC] button to change the operation
mode.
2. Each time press the [SRC] button, the operation
mode changes in the following order:
“TUNER” “USB” “B/TOOTH AUDIO”
“TUNER” ...
Adjusting the volume
Press the [VOL +/-] to increase/decrease the vol-
ume.
“VOL XX” will be displayed where “XX” is the vol-
ume level from 0 (minimum) to 30 (maximum).
Note:
• Factory default setting for volume is “VOL 10”.
Audio mode adjustments
1. Press the [ /
] button less than 1
second to enter the Audio Adjustment mode.
2. Press the [ /
] button to select the
“item name”.
(PRE-EQ) “BASS” “MID” “TREBLE”
“BALANCE” “FADER” Exit Audio Mode
(Main Display)
3. Press the [VOL +/-] to adjust selected sound
mode.
PRE-EQ : Adjustment range: FLAT/POP/
ROCK/CLASSIC/HIPHOP/
DANCE/JAZZ/HEAVY METAL
BASS
: Adjustment range : -7 to +7
MID
: Adjustment range: -7 to +7
TREBLE : Adjustment range : -7 to +7
BALANCE : Adjustment range : LEFT 12 to
RIGHT 12
FADER
: Adjustment range : REAR 12 to
FRONT 12
