Protocol Propaq 242, Инструкция по применению

Страница: 20 / 120

20 Protocol Systems, Inc.
5.
To select which vital sign waveforms will display, from the Main Menu press
SETUP, MORE,
WAVE SELECT.
Use
NEXT
and
ON/OFF
to turn on the desired waveforms in the Wave Select
window.
.
You can turn on all waveforms, but only the first four waveforms selected as ON in the Wave Select
window are displayed. You cannot turn off the ECG1 waveform.
6.
To set the HR/PR source, display sweep speed, tone volumes, and display brightness, from
the Main Menu press
SETUP, MORE
to access Setup Menu 2. Use
NEXT
and
CHANGE
to select
settings.
CURRENT SOURCE
When the selected HR/PR source is no longer available, the current
source is the active source with highest priority. The RR/BR source
cannot be manually selected. It is always CO
2
if CO
2
is active.
Otherwise, it is ECG/RESP.
SELECTED SOURCE
The user-selected HR/PR source is displayed along with the HR/PR
source currently used by the monitor.
SWEEP (mm/s)
Selectable sweep speeds for HR/PR: 12.5, 25, 50 mm/sec.
Selectable sweep speeds for RR/BR: 3.13, 6.25, 12.5 mm/sec.
ALARM TONE
Sets the Alarm Tone volume to HIGH, MEDIUM, or LOW.
HR/PR TONE
Sets the Heart Tone volume to HIGH, MEDIUM, LOW, or OFF.
BRIGHTNESS
Sets the display brightness to NORMAL or LOW.
Warning
At the highest volume alarm level, the sound pressure level does not exceed safe limits (OSHA HSM 73-1101,
1972). However, additional precautions may be required in patients under treatment with ototoxic medications.
SETUP
ECG 1 : ON
WAVE SELECT
CO
2
: ON
RESP : ON
SpO 2 : ON
NIBP : ON
ECG 2 : ON
NEXT
ON/
OFF
INSERVICE PREVIOUS
MENU
PA : ON
P 2 : ON
SETUP
CURRENT SOURCE : ???
SELECTED SOURCE : ECG
SWEEP (mm/s)
ALARM TONE
HR/PR TONE
PATIENT MODE
BRIGHTNESS
HR/PR RR/BR
NEXT CHANGE WAVE
SELECT
MORE
???
---
: 25.0 6.25
:
:
:
:
LOW
OFF
ADULT
NORMAL
PRINTER
The ? ? ? is
displayed until
a source is
active.