START-UP PROCEDURE
NOTE:
1. While the drone is in process of synchronizing, the lights will flash
quickly. When the process is completed, the lights will go steady.
This is your indication that the process is completed.
2. If after 30 seconds, it has not recognized the drone, turn off the controller
and repeat Start-Up procedure.
Before flying, the drone and transmitter must be turned on in sequence
and synchronized.
1. Turn on the remote. The indicator light will flash rapidly.
2. Turn on the drone by pressing the power button until all the lights are on
(approximately 3 seconds).
3. Push the throttle up and then down to sync. You will hear two beeps and the
lights will go steady.
6
