PROTO Limited Warranty
DYE Precision, Inc. warrants that your PROTO
®
Switch™ goggle system will be
free from defects in materials and workmanship for one (1) year from the date of
original retail purchase.
Any product determined by DYE
®
to be defective in materials or workmanship in
accordance with the above warranty will be repaired or replaced, at the option of
DYE
®
, free of charge when received at the factory freight prepaid, together with
proof of purchase.
This warranty is expressly in lieu of all other warranties. Any implied warranties of
merchantability or fitness for a particular purpose are limited to the same duration
as this express warranty.
This warranty does not cover incidental or consequential damages. DYE
®
shall not
be liable for any incidental or consequential damages. Some states do not allow the
exclusion or limitation of implied warranties, incidental or consequential
damages, so the above limitations and exclusions may not apply to you.
20
Attaching the Chin Strap
1
To connect the strap, hold each end of the buckle and
line them up so that the forks are pointing toward the
opening of the other buckle. Insert the fork part of the
buckle into the other one until you hear a little snap noise;
that noise will indicate that your chin strap is locked. Once
you have heard that click, your Proto Chin strap is now
ready for use.
[See figure 1]
2
To release the strap simply pinch the two rounded bumps
on the buckle until they are lower then the side wall of the
buckle. Once the bumps are lower, pull one end of the strap
away from the other until the buckle is completely separated,
then your strap will be released.
[See figure 2]
3
To adjust the size of the strap simply pinch the side locker
from end to end and rock the locker back and forth until
the strap becomes looser. To tighten it grab one part of the
strap and then slide the locker down toward the mask. This
will cause the strap to get tighter.
[See figure 3]
19
1
2
3
