10
IR Remote Control
POWER
REC
PAUSE/
STILL
SP/EP
STOP
PLAY
REW
F.F
TRACKING
POWER
Don’t use this button. The VCR power is controlled by
the internal microprocessor. The VCR will automati-
cally power up when 12VDC is applied to the VCR.
REC
Press these two (2) buttons simultaneously to manu-
ally start recording.
PAUSE/STILL
Press during recording to pause recording. Press dur-
ing the playback to freeze the picture.
Caution:
If this button is held for 6 seconds then it will
master reset the VCR and clear all the programming to
factory default.
SP/EP
Don’t use this button. Recording speed can only be set
in the on screen programming mode.
STOP
Press this button to stop a running tape. Alternatively
press and hold that button for 3 to 5 seconds to access
the programming mode.
PLAY
Press this button to start the play back mode.
REW
Press to rewind the tape during the stop mode and to
reverse picture search in play back mode.
FAST FORWARD
Press to fast forward the tape during the stop mode,
and forward picture search in the play back mode. In
programming mode use this button to access the menu
selection.
TRACKING
Use (+) or (-) button to manually adjust the tracking of
the picture. In the programming mode use these but-
tons to move the cursor upward or downward.
