Proteus ATEX Zone 1, Оригинальное руководство пользователя

Страница: 59 / 72

59
Version A Mini-Cam Proteus ExZ1
Cautionary Warning
The second warning is cautionary – the inspection equipment pressure is getting
near to the Uncompliant low pressure, and you should consider whether the
remaining pressure is adequate for you to continue the inspection, or whether you
should abandon the inspection and re-pressurise before continuing.
You must press OK to acknowledge this warning. The inspection equipment can still
be used as the pressure is still Compliant.
ATEX-1 Pressure Uncompliant
When the system is in ATEX-1 Zone mode and the pressure in any inspection
equipment falls below a ‘Compliant’ limit, the CCU will show an alert and the
power to the inspection equipment will be removed:
Press OK to acknowledge the alert, and then choose whether to continue using the
Uncompliant inspection equipment by switching to OVERRIDE and powering ON
again, or whether to abandon the survey and remove the inspection equipment
manually without power.