Proteus ATEX Zone 1, Оригинальное руководство пользователя

Страница: 58 / 72

58
Version A Mini-Cam Proteus ExZ1
During the Inspection
During ATEX inspections you should keep the inspection equipment power ON at
all times, unless there is reason for you to manually remove the power (or because
ATEX-1 monitoring has removed the power itself). This is in order to ensure that
the pressure and compliance monitoring of the inspection equipment is constantly
active throughout the inspection.
Pressure and Compliance Monitoring
Pressure Warnings
All the time that the inspection equipment is powered ON, the pressures of the
inspection equipment are being monitored. If a pressure begins to get low, the CCU
shows a series of warnings.
Advisory Warning
The first warning is advisory – the inspection equipment pressure is getting low,
and you should re-pressurise at the earliest opportunity. The warning tells you which
inspection equipment is getting low on pressure.
You must press OK to acknowledge this warning. The inspection equipment can still
be used as the pressure is still Compliant.