14
5.0 Door Access Control
The Protégé® SE Integrated System Controller provides Access control functionality
onboard
without the requirement for additional hardware. With 2 Access controlled Doors built in, the
flexibility of the Protégé® System as expanded even further.
The Protégé® SE Integrated System Controller allows the connection of 2x Wiegand devices
to
control 2 doors (Entry or Exit Only) or can be configured in Multiplex Mode to allow 4x Wiegand
devices controlling 2 doors giving the flexibility of Entry and Exit readers.
5.1 Card Reader Connection
The following diagrams show the connection of standard Wiegand Reader with the Protégé®
SE
Integrated System Controller controlling an Access Door in Entry or Exit mode (2 Doors, 2 Readers).
!
The shield connection on the card reading device that is connected to the
Protégé® SE Integrated System Controller port should not be connected to a AUX-
or 0V connection. Do not join the shield and black wires at the card reading device.
The shield should not be connected to any shield used for isolated communication.
Always refer to the card reader manufacturer for detailed installation guidelines.
The beeper output on the Protégé® SE Integrated System Controller provides
diagnostic information to the end user and installer when access is denied or the
unit is operating offline.
Figure 16 - Card Reader Connection
+AUX-
Z9 COM
COM
Z10 Z11
Z12
L1
D0
D1
BZ
SHIELD
*
* See Text
N/R = Not Required
N/R
N/R
RED
BLACK
GREEN
WHITE
ORANGE
BROWN
YELLOW
BLUE
!
If the Protégé® SE Integrated System Controller is used with the expansion
connector fitted then the second onboard reader port becomes unavailable.
