protech PS8852, Руководство пользователя

Страница: 54 / 121

Chapter 3 Software Configuration
Page:3-14
PS8852 USER
′
S MANUAL
BIOS screen to change mode
Step 3:
Press the device number like ”1” which
you would like to change.
Step 4:
Show [Warning !] message. Press “Y” as
asking ”Are you sure?(Y/N)” to make sure
you would like to set the SATA HDD to RAIDm
1 mode.
Step 5:
Press “Y” again as asking “Are you really sure?
(Y/N)” to reconfirm you want to set RAIDm1
mode.
Step 6:
BIOS shows the hard disk is RAIDm1 mode,
it means changing to RAIDm1 mode is
successful. Pressing <ESC> key to continue
Step 7:
Please turn to “ 3.
Install Drivers”
for
installing the driver.
2-2. Set ATA environment
As you follow the following procedure, the SATA hard disk is set for general
use. The procedure is as below:
Procedure 1: 2-2-A. Set BIOS to ATA mode
Procedure 2: 3. Install Drivers
The detail steps are described as below.
2-2-A. Set BIOS to ATA mode
There are 2 conditions as below for setting ATA mode. Please choose the
item by your requirement.
1. The first time use
If this is your first time to set the SATA hard disk for general use,
please refer to
2-2-A-1. The first time use.
2. Changing original RAIDm1 mode to ATA mode
If you have ever set the SATA hard disk as RAIDm1 mode previously, and
now you would like to abort RAIDm1 real-time data protection feature to get