Protec 7014-9-0000 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 42

background image

PRS 500 B User Manual

5014-0-0002

PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany

24 from 42

4.6

Function of the PRS 500 B

4.6.1

Switching the PRS 500 B ON

(1)

Switch on the main switch of the X-ray room

(2)

Switch on the operation PC (The PC starts up normally)

(3)

Switch on the EC-Box at the air switch on the side of the EC-Box. The green light on top of the EC-

Box lights up and shows the on-state.

(4)

Press the “ON”-button (appr. 2 seconds) on the control console. The LED ring around the button

lights up and shows the on-state of the system. The Touch-PC on the tube head starts up and the
software will also start automatically.

(5)

After the two PCs have finished the start-up process the system is ready to use.

4.6.2

Switching the PRS 500 B OFF

CAUTION!

Before switching off the PRS 500 B system ensure that the tube head is turned
to 0° to avoid accidently turning movements and damages of the tube head.

(1)

Press the “OFF”-button (appr. 2 seconds) on the control console.
The LED ring around the button lights up and shows the turning off state of the system. After a few
seconds the power of the electronic is turned off and the system is ready to be switched off.

NOTE

To perform a regular shutdown of the Touch PC it is necessary that the CONAXX
software is running on the operator PC and on the Touch PC at the same time while
the “OFF” button on the control console is pressed. If one component is not working
there is no communication between both parts and the system cannot shut down.

(2)

Switch off the air switch on the side of the EC-Box.

(3)

Exit the software of the operation PC.

(4)

Switch off the main switch of the X-ray room.

NOTE

If CONAXX is closed on the Touch PC or operator PC before the system is shut down
it is possible to perform a “hard shutdown”.
The “OFF” button on the control console has to be pressed 5 seconds at least to cut
the power supply to the system.

«
...
22
23
24
25
26
...
»

Содержание 7014-9-0000











































Отзывы:

Нет отзывов

Похожие инструкции для 7014-9-0000

Бренд: Garmin Страницы: 2

Бренд: unios Страницы: 2

Бренд: Tactile Medical Страницы: 23

Бренд: Taarup Страницы: 72

Бренд: Salter Страницы: 18

Бренд: Salter Страницы: 42

Бренд: Salter Страницы: 47

Бренд: Salter Страницы: 35

Бренд: Salter Страницы: 40

M-041 INDOOR CROSS

Бренд: Salter Страницы: 15

Aristo WeldCloud Mig U5000i

Бренд: ESAB Страницы: 28

WELCH LVS 600 T

Бренд: Gardner Denver Страницы: 68

Бренд: GE Страницы: 644

Бренд: ALL-FILL Страницы: 32

ESK+ Manual Knee Lock

Бренд: Blatchford Страницы: 172

Бренд: HEINE OPTOTECHNIK Страницы: 52

Бренд: Ugin Страницы: 39

Бренд: Numark Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды