23
MARK68AF1001 Rev 2
Standby Mode
When the unit is in standby mode, you can change the settings and review equipment
specficiations in the settings.
When the unit is in standby mode the LED decorative lighting can be changes and
customers can set up their massage session prior to starting the session.
You can also enter into the settings when the unit is in Standby mode and go into Service
Mode.
To enter the settings click the top left button in the screen that says, "SETTINGS".
Once in the Settings you can click on the tab you need to change your settings.
• General Tab
• Change to Remote Timer, Stand-Alone or Stand-Alone C Mode. Change the
session time, cool down time, water temperature and turn on and off Quick Start,
Demo Mode and the general Pin Requirement. You can also change your Pin Code
or password here.
• Region Tab
• Change from Faranheit to Celcius, Change your time zone, Use the 24 hour
clock option, Set the date and time automatically and retrieve the Date and Time
information.
• MyAquaFrixio Tab
• Check for new software updates
• Media Tab
•
Turn on and off the Studio and Wellness music option.
• WiFi Tab
•
Connect your unit to the Wifi network in order to be connected to the service portal
and get the latest updates.
• Manual Mode Tab
• Used for troubleshooting and checking individual components in your unit.
• About Tab
• See your serial number, Software ID code, Massage hours, Session hours and
number of sessions.