KLEv3 User Manual V1.0
9
3.4. Default Settings
The factory default network settings for KLEv3 are as follows:
IPv4 Address: 192.168.1.200
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DNS Servers: 192.168.1.254
Default access to KLEv3 Web Management Interface: https://192.168.1.200:5908
Figure 3: Welcome to KLEv3 Management
Default administrator account name and password:
User name: superuser
Password: superu
3.5. First Access to the Web Management
The first access to the KLEv3 HTTP server can be a little bit tricky if the default settings of KLEv3,
i.e., HTTPS://192.168.1.200:5908 are not compatible with your LAN, or if another machine
already occupies this address. In this case preferably use KCenter or getipdev
(
http://www.prosum.net/download/GETIPDEVInstall.exe
) to give a temporary IP address to
KLEv3. Then open the KLEv3 web management to confirm this IP address or to change the IP
settings.
* You could also create an isolated network, not connected to the local or company network, between KLEv3 and a
computer with a simple cross connect cable. Then set up the IP address of the computer to something like 192.168.1.xxx
, and then with a browser, open KLEv3 management at default address HTTPS://192.168.1.200:5908
*
When accessing to the KLEv3 Web Management, your browser may provide a security warning. Please choose
"Continue to this website" since there is no risk of pirate website here. These warnings are not relevant for HTTPS
servers of hardware devices such as KLEv3. You can also install the Root certificate of KLEv3 in the list of trusted CA if
you want to remove this warning. You will also have to authorize the usage of certificates that do not contain the
name of the HTTPS server.
